Irrigation System Installation
for Odessa & Midland, TX

Factors To Consider When Installing a New System

There are many factors to consider when deciding to install a brand new lawn sprinkler system for your home, business, or multi-family living community. Among the most important factors to consider are location, type of grass, size of the lawn, and your budget.

If you would like to discuss these factors with an experienced irrigation system professional from Lush Lawns of Texas, LLC, call us at 432-606-YARD, or fill out our online request form. We offer free estimates and have been helping homeowners in the West Texas area for the last several years.

What Water Source Will You Use?

The first step in installing a new sprinkler system is defining your water source. Most sprinkler systems draw from a city water source. Some people choose to dig a well and use that as a water source instead, while others draw from a canal or lake.

If you use your well as a water source, make sure it is deep enough to reach the water table. The general rule of thumb is that if you can drop an 8-ft. pipe down the well and hear it “clink” off of rocks below, then you have just hit the water table. Every area in Odessa has different depths and water table levels, so you will want to find out what level is appropriate for your area.

Like anything else, it is important to set aside enough money for your sprinkler system. There are lawn sprinkler contractors who work with financing companies to help make the process of installing a new lawn sprinkler system more affordable.

Every lawn sprinkler irrigation system is designed differently. You can either opt for a drip or spray irrigation system. In some cases, if your yard is not very large and you do not need to water frequently, it may be sufficient to simply use a low-flow sprinkler system and frequency controller.

Some irrigation applications are very demanding while others are not as severe. You will need to weigh your options based on your needs and the type of grass or landscape you have in the yard.

The location of the irrigation system is one of the most important things to consider when installing one. There are several factors that must be taken into consideration when installing a new irrigation system. The most important factors would be how large an area needs watering and what type of soil there is.

In order for any lawn sprinkler system installation to work properly, it will need access to power supplied by electricity or gas and access to water from a pipe, well, gravity feed or municipal water source.

Depending on the grass or plants being watered, different types of sprinkler heads will be needed. If the lawn is mostly made up of grass you will probably need one type, but if it is mostly shrubbery or flowers, a different type may be required. Some grass types require more water than other grass types. Be sure to do your homework before installing a new irrigation system for your home, business, or multi-family living community.

Watering the Slope of the Land

The angle at which water is dropped onto the ground can make a large difference in how much water is actually used and spread over an area by a lawn sprinkler system. On a slope, irrigation systems will require a higher GPM (gallon per minute) to compensate for the loss of water pressure. You will want to consider the slope and angle when installing a new irrigation system, as it can make a big difference in how effective your system is.

What Type of Soil Do You Have?

One of the things to consider for a lawn sprinkler system is what type of soil you have. Obviously, different types of earth will be better for water drainage than others. Clay soil has poor drainage and tends to hold onto water longer than other types of soil, which can ruin your sprinkler system. On the other hand, sandy soil will cause your irrigation system to work harder in order to water effectively because of the increased drainage rate.

Gathering all of your facts from above will help you to determine just how big an area needs watering and what type of sprinkler heads to use in the system. Carefully consider all the above factors when designing a new lawn irrigation system.

Gathering all of your facts from above will help you to determine just how big an area needs watering and what type of sprinkler heads to use in the system. Carefully consider all the above factors when designing a new lawn irrigation system.

Another major question in the installation process is how many zones are needed for the new system. The answer to this question largely depends on how much space needs watering. For example, large yards with lots of trees and other landscaping features will probably require more than one zone. The most important factor is your flow rate and how many sprinklers you can put in a given zone until you max out your flow rate. Also to be taken into account when organizing your zones is friction loss to design an optimal system.

The final step in installing a new lawn sprinkler system is to design all of the parts needed for your specific needs. Once this final design is created, you can begin shopping around for suppliers and purchasing the components you need to make your design a reality. The final design will list the parts to be purchased with exact specifications on what they will look like, in turn making the installation process much easier.

Purchasing the Right Irrigation Products

The last step is to purchase the irrigation products you need for your project. There are many different types of lawn sprinkler systems and irrigation parts available, including nozzles, spray heads and frequency controllers. These days there are even wireless control systems that let you control the watering schedules from your smartphone or tablet.

If you want your lawn sprinkler system to reach its full potential, you’ll need to choose high-quality components with a long lifespan. Picking out quality irrigation components in the beginning can save you thousands of dollars in repair and replacement costs later on.

The final step is to have a team of professionals complete the sprinkler installation process. In most cases, it will take around two days for an experienced irrigation company to complete all of the work. Once your lawn sprinkler system has been installed, you’ll be able to create an irrigation schedule that automatically waters your grass during the right times.

Key Points to Remember:

• Knowing your water restrictions and limitations before you begin your project will save you money in the long run.
• If you have any trees or shrubs around your house, don’t forget to install a drip line system to keep them healthy and green while saving water at the same time.
• When you’re ready to install your new sprinkler system, it’s important to realize that not all irrigation companies are the same. Even if a company is located right in your area, not every lawn sprinkler installation service will be able to provide quality workmanship. We guarantee quality work and service with every installation, maintenance, or repair service done.